Add PulseChain Network to MetaMask in 60 Seconds

Quick Summary: PulseChain Network Details

Copy these verified details to add PulseChain manually:

Network Name:	PulseChain
RPC URL:	https://rpc.pulsechain.com
Chain ID:	369
Currency Symbol:	PLS
Block Explorer:	https://scan.pulsechain.com

Method 1: One-Click Automatic Setup (Recommended)

The fastest way to add PulseChain to MetaMask is through our automatic setup. This method takes 15 seconds.

Step 1: Visit PulseChain Bridge

Navigate to pulse-bridge.com in your browser with MetaMask installed.

Step 2: Connect Your Wallet

Click "Connect Wallet" in the top right corner. Select MetaMask from the wallet options. Approve the connection request in the MetaMask popup.

Step 3: Automatic Network Detection

If PulseChain is not yet added to your MetaMask, you'll see a prompt: "Add PulseChain Network to MetaMask?"

Click "Add Network" → MetaMask will open with pre-filled PulseChain details → Click "Approve" → Done!

Result: PulseChain network is now available in your MetaMask network dropdown. MetaMask automatically switches to PulseChain.

Method 2: Manual Setup (Alternative)

If automatic setup doesn't work or you prefer manual configuration, follow these detailed steps.

Step 1: Open MetaMask Network Menu

1. Click the MetaMask extension icon in your browser
2. Click the network dropdown at the top (shows current network, e.g., "Ethereum Mainnet")
3. Scroll to the bottom and click "Add Network"

Step 2: Choose "Add a network manually"

MetaMask will show popular networks. At the bottom, click "Add a network manually" to enter custom details.

Step 3: Enter PulseChain Network Details

Copy and paste these exact values:

• Network Name: PulseChain
• New RPC URL: https://rpc.pulsechain.com
• Chain ID: 369
• Currency Symbol: PLS
• Block Explorer URL: https://scan.pulsechain.com

⚠️ Important: Double-check the Chain ID is exactly 369 and RPC URL has no typos. Incorrect values will prevent connection.

Step 4: Save and Switch

Click "Save" at the bottom. MetaMask automatically switches to PulseChain network. You'll see "PulseChain" in the network dropdown.

Verification: Confirm Setup Worked

After adding PulseChain, verify it's working correctly:

1. Check network name: Top of MetaMask should display "PulseChain"
2. Check currency: Your balance area should show "0 PLS" (or your PLS balance)
3. Test block explorer: Click the three dots → "View on block explorer" → Should open scan.pulsechain.com

If all three checks pass, setup is complete!

Mobile Setup: MetaMask Mobile App

The process on iOS/Android MetaMask app is slightly different:

Automatic Method (Mobile)

1. Open MetaMask mobile app
2. Tap browser icon (bottom navigation)
3. Navigate to pulse-bridge.com
4. Tap "Connect Wallet"
5. When prompted, tap "Add Network"
6. Approve in MetaMask → Done!

Manual Method (Mobile)

1. Open MetaMask app
2. Tap hamburger menu (top left)
3. Tap "Settings"
4. Tap "Networks"
5. Tap "Add Network"
6. Enter PulseChain details (same as desktop)
7. Tap "Add"

Alternative RPC URLs (If Primary Fails)

If https://rpc.pulsechain.com is slow or unavailable, try these backup RPC endpoints:

• https://rpc-pulsechain.g4mm4.io
• https://pulsechain.publicnode.com
• https://rpc.v4.testnet.pulsechain.com (Testnet only)

To change RPC: Go to MetaMask Settings → Networks → PulseChain → Edit → Change RPC URL → Save.

Common Issues and Fixes

Issue 1: "Chain ID 369 Already Exists"

Cause: You've already added a network with Chain ID 369.

Fix:

1. Go to Settings → Networks in MetaMask
2. Find the existing Chain ID 369 network
3. Delete it or edit its details to match PulseChain
4. Try adding again

Issue 2: "Could Not Fetch Chain ID"

Cause: RPC URL is incorrect or network is down.

Fix:

• Double-check RPC URL has no typos
• Try an alternative RPC URL from the list above
• Check your internet connection
• Wait 5 minutes and try again (temporary network issue)

Issue 3: Network Added But Balance Shows "Unable to Load"

Cause: RPC endpoint is slow or overloaded.

Fix:

• Switch to a different RPC URL
• Wait 30-60 seconds for connection to establish
• Disconnect and reconnect MetaMask

Issue 4: Transactions Failing After Adding Network

Cause: Incorrect Chain ID or no PLS for gas.

Fix:

• Verify Chain ID is exactly 369
• Ensure you have PLS in your wallet for gas fees
• If you just bridged, wait for bridge completion before transacting

Next Steps After Adding PulseChain

1. Get PLS for Gas Fees

You need PLS (PulseChain's native token) to pay for transactions on PulseChain. Options:

• Bridge ETH: Use our bridge guide to move ETH from Ethereum
• Use a faucet: Get small amount of free PLS for testing
• Swap on PulseChain DEX: If you have other tokens on PulseChain

Recommended: Bridge a small amount of ETH first (~$20-50) to cover gas fees for future transactions.

2. Start Bridging Assets

Now that PulseChain is in MetaMask, you can bridge:

• Bridge ETH to PulseChain
• Bridge ERC-20 tokens (USDC, DAI, etc.)
• Bridge from Coinbase or Binance

3. Explore PulseChain DeFi

With PulseChain added and PLS for gas, explore the ecosystem:

• DEXs (PulseX, 9inch, etc.)
• Lending protocols
• Yield farms
• NFT marketplaces

Check our Top 10 DeFi Protocols guide for recommendations.

Security Best Practices

Verify Network Details

Always double-check RPC URL and Chain ID before approving. Phishing sites may provide fake network details to steal funds.

✅ Correct Chain ID: 369
❌ Fake Chain ID: Any other number

Use Official RPC Endpoints

Only use RPC URLs from trusted sources:

• Official PulseChain documentation
• Verified bridge sites (pulse-bridge.com)
• PulseChain community channels

Never use RPC URLs from unknown Telegram users, Discord DMs, or suspicious websites.

Protect Your Seed Phrase

Adding a network to MetaMask never requires your seed phrase. If a site asks for your seed phrase during network setup, it's a scam.

Frequently Asked Questions

Q: Is adding PulseChain to MetaMask safe?

A: Yes, if you use correct network details from official sources. Adding a network doesn't give the network access to your funds—it only allows MetaMask to connect to that blockchain. Always verify Chain ID (369) and RPC URL.

Q: Can I use the same MetaMask wallet on both Ethereum and PulseChain?

A: Yes! Your MetaMask wallet address is the same across all EVM-compatible chains. You just switch networks using the dropdown. Your ETH balance shows on Ethereum network, PLS balance shows on PulseChain network.

Q: Do I need a separate MetaMask for PulseChain?

A: No, use the same MetaMask. Simply add PulseChain as a new network. You can have multiple networks in one MetaMask installation and switch between them.

Q: Will adding PulseChain affect my Ethereum assets?

A: No, your Ethereum assets remain on Ethereum. Adding PulseChain network just lets you view PulseChain assets in the same wallet. Networks are separate; assets on one don't affect the other.

Q: Can I remove PulseChain network later?

A: Yes, go to Settings → Networks → PulseChain → Delete. This doesn't affect your assets—they remain on PulseChain blockchain. You just won't see them in MetaMask until you re-add the network.

Q: What's the difference between PulseChain and PulseChain Testnet?

A: PulseChain is the mainnet (real money). PulseChain Testnet is for testing (fake money). Most users only need mainnet (Chain ID 369). Testnet is for developers testing dApps.

Q: How do I switch between Ethereum and PulseChain?

A: Click the network dropdown at the top of MetaMask. Select "Ethereum Mainnet" to view Ethereum assets, "PulseChain" to view PulseChain assets. Switching is instant.

Video Tutorial (Coming Soon)

We're creating a video walkthrough showing the exact clicks for both desktop and mobile. Subscribe to our YouTube channel for updates.

Summary: Quick Setup Checklist

✅ To add PulseChain to MetaMask:

1. Open MetaMask → Click network dropdown → "Add Network"
2. Enter: Name = PulseChain, RPC = https://rpc.pulsechain.com, Chain ID = 369, Symbol = PLS
3. Add block explorer: https://scan.pulsechain.com
4. Click "Save"
5. Verify network appears in dropdown

⏱️ Time required: 60 seconds (automatic) or 2 minutes (manual)

🎯 Next step: Bridge ETH to PulseChain to get started!